Ip Networking Programming Example - Inter-Tel AXXESS Manual

C. IP NETWORKING PROGRAMMING EXAMPLE
4.7 This section provides an example of how to set up a network using the IPRC based on
the information provided in the following tables.
:
Table A-5.
Local IP Connection
Remote IP Connection (N2)
Remote IP Connection (N3)
Table A-6.
Local IP Connection
Remote IP Connection (N1)
Remote IP Connection (N3)
Table A-7.
Local IP Connection
Remote IP Connection (N2)
Remote IP Connection (N1)
4.8
To program the database:
NOTE:
programming for private networking. See
wizard.
Under System\Cabinets, add and equip an IPRC (see
1.
When prompted, enter the P6XXY extension (i.e., P6010) for the local node.
2.
Under System\Devices and Feature Codes\Nodes, create all of the remote nodes (see
3.
page
Under System\Devices and Feature Codes\IP Connections\Local\P6XXY, program the
4.
Static IP Address (i.e., 192.168.0.1), Static Subnet Mask, and Static Gateway Address
fields (see

IP Networking Programming Example

INTER-TEL
Programming for Node 1
Description
Programming for Node 2
Description
Programming for Node 3
Description
System software v9.0 and later provides a networking wizard to simplify the required
6-190). Program the Description and Username for each node.
page 6-172).
Appendix A — Networking
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
Extension
P6010
P6020
P6030
Extension
P6020
P6010
P6030
Extension
P6030
P6020
P6010
page 6-87 for more information about the networking
page 6-145).
IP Address
192.168.0.1
192.168.0.2
192.168.0.3
IP Address
192.168.0.2
192.168.0.1
192.168.0.3
IP Address
192.168.0.3
192.168.0.2
192.168.0.1
Page A-13