Inter-Tel AXXESS Manual page 1100

Programming
® ®
INTER-TEL AXXESS
4.356 To run the Hybrid Balance Test:
NOTE:
(page
1.
2.
3.
Page 6-250
MANUAL VERSION 11.0 – May 2008
Proceed only if the "Print Expanded Message Print" capability has been enabled
6-248) and the "CO Timeout in seconds" timer is set to 4
From the left pane of DB Studio, select System – Devices and Feature Codes –
A list of trunks appears in the right pane, identified by Extension, CO Trunk Group,
Type, and Address.
For a single trunk, right-click the extension in the Extension, Type, or Address column
of the desired trunk. On the menu, select
For all trunks, right-click the background area of the Trunks window, and select
Hybrid Balance Test (All Loop Starts)
or
Run Hybrid Balance Test (All LS and GS)
NOTE:
While the Hybrid Balance Test runs, the selected trunk(s) are placed in a Busy
condition.
When the following window displays, click
(page 6-249).
Run Hybrid Balance Test
,
Run Hybrid Balance Test (All Ground Starts)
.
.
OK
.
Trunks
.
Run
,
Trunks