Inter-Tel AXXESS Manual page 1150

Programming
® ®
INTER-TEL AXXESS
9.89 To add dial patterns to the route group: Right-click anywhere in the right side of the
window (if there is no blank space, press
1.
2.
9.90 To move a dial pattern to another location in the list: Drag and drop the pattern to
the new position. Or, highlight the dial pattern to move and press
to move the dial pattern up or down in the list.
9.91 To delete a dial pattern from the list: To delete one or more dial pattern from the list,
highlight them and then right-click. Select
NOTE:
you want. To highlight two or more items that are not consecutive, hold down CTRL while
selecting the desired items.
9.92 Facility Groups: For each route group, select the facility group(s) to be used to route
the calls. Facility groups must be placed in the list in the order that you want them to be
selected. To determine the facility groups that will be used by this route group, double-click on
Facility Groups
lowing:
9.93 To add facility groups to the route group: Note that this is an ordered list. Place the
facility groups in the list in the order you want them to be used.
1.
2.
3.
4.
9.94 To move a facility group to another location in the list: Drag and drop the facility
group to the new position. Or, highlight the facility group to move and press
down arrow to move the facility group up or down in the list.
Page 6-300
MANUAL VERSION 11.0 – May 2008
Select
Add To Dial Patterns List
Select the new dial pattern and enter its digits in the text box. Then press
select another field to save the change.
To highlight a series of items, hold down SHIFT while selecting the first and last items
. The current list of facility groups, if any, appears. You can then do the fol-
To add to the bottom of the list: Do not highlight any existing entry and right-click
anywhere in the right side of the window. An option box appears.
To add to the list above an existing device: Highlight the entry below the location
where you want the new entry and then right-click. An option box appears.
Select
Add To Facility Groups List
of device to include.
Select and then select
Facility Group
(You can view them in a list by selecting the List button or view details by selecting the
Details button.)
NOTE:
To highlight a series of items, hold down SHIFT while selecting the first and last
item you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
Highlight the facility group(s) you want to add and then select
you select more than one, they will be placed in the list in numerical order, not in the
order you select them. To keep the list in the proper order, you may have to add one at a
time.) When you have added all the facility groups you need, select
tions appear in the list.
NOTE:
If you want to see the programming for a specific facility group, double-click on
its number to jump to its programming area.
). An option box appears.
CTRL+N
. A blank dial pattern is added to the bottom of the list.
Remove Selected Items
. A window appears that asks you to select the type
. The list of available facility groups appears.
Next
Programming Route Groups
or
ENTER
+ the up/down arrow
CTRL
.
. (Note that if
Add Items
. Your selec-
Finish
+ the up/
CTRL