Inter-Tel AXXESS Manual page 1072

Programming
® ®
INTER-TEL AXXESS
•
Record-A-Call
4.257 The Record-A-Call software license is required, and a Record-A-Call application must
be created in the Voice Processor database. There are three fields for the Record-A-Call fea-
ture: Mailbox, Mailbox User-Keyed Extension Flag, and Application. Programming for each is
described below. The application and mailbox might not be on the same node as the station. If
so, the Voice Processor applications must be programmed as off-node devices on the local
node and the station must be an off-node device on the Voice Processor's node (see
198).
Page 6-222
MANUAL VERSION 11.0 – May 2008
— System Speed Dial Key: Select the system speed-dial location (000-999 or 0000-
4999) that will be assigned.
— Trunk Key: Select the individual trunk that will be selected when this button is
pressed.
— Trunk Group Key: Select the trunk group that will be selected when this button
is pressed.
— Undefined Key: No further programming is necessary. This button can be pro-
grammed by the user.
To program the selection, right-click the Selection value and do the following:
Select
a. Change Selection
include.
Select the type (feature code, station, etc.) and then select
b.
(You can view them in a list by selecting the List button or view details by select-
ing the Details button.)
Highlight the appropriate item and then select
c.
the Selection field.
Ring When: This field allows the station to receive a burst of ringing when a certain
number of calls are present at a primary station, and at least one call is ringing or
camped on. The ring burst will repeat periodically as long as the programmed number
of calls are present at a primary station. (This period is determined by the DKTS Sec-
ondary Extension Key Alerting Tone timer.) If this field is set to 0, the secondary sta-
tion will never receive the burst of ringing. To set this number, select the current Value
and scroll to or enter the new value in the box. Then press
field to save the change.
. A window appears that asks you to select the type to
Finish
. A list appears.
Next
. Your selection appears in
or select another
ENTER
page 6-
Stations on the Local Node