Table 6-43 Transfer Destination - Inter-Tel AXXESS Manual

Programming
® ®
INTER-TEL AXXESS
•
Page 6-362
MANUAL VERSION 11.0 – May 2008
— Transfer To Collected Extension: (Cannot be used for Timeout, *, #, or 0) To
allow callers to dial extension numbers of stations and hunt groups (including off-
node devices) that have a mailbox or extension ID, use this Action for digits that
correspond to the first digits of extension numbers. For example, if digit 1 is
"Transfer To Collected Extension," callers can dial extension numbers that begin
with 1. (However, if digit 1 is "Transfer to Extension 2000," as described on the
next page, a caller attempting to dial a station extension number that begins with 1
will instead be transferred to 2000.)
NOTE:
If a caller dials an extension number of a mailbox that does not have an
associated station, the call will be sent to the mailbox instead of an extension.
— Transfer To Extension: This sends the call to the extension (station, hunt group,
application, or off-node device) that appears in the Transfer Destination field.
— Transfer To Mailbox: This sends the call to the designated mailbox.
— Transfer To Node: (Not available for Timeout.) This sends the call to a digit
translation node that allows access to further digit translation options.
— Transfer To Operator: This transfers the call to the programmed Dial-0 Destina-
tion. (See page 6-344.)
NOTE:
If you select Transfer To Operator and there is not a programmed Dial-0
Destination (see page
the Dial-0 Destination.
— Hang Up: (This is used for Timeout only.) This disconnects from the call if the
user does not enter a digit.
Transfer Destination: The actions Select Fax Document, Transfer To Extension,
Transfer To Mailbox, and Transfer To Node each require a Transfer Destination. See
the chart below to determine the type of destination, if any, to be programmed for the
digit translation.
Table 6-43:
Transfer Destination
Action
Cancel Fax Selections
Company Directory - First Name
Company Directory - Last Name
End Fax Selections
Invalid
Select Fax By Document Number
Select Fax Document
Subscriber Access
Transfer To Collected Extension
Transfer To Extension
Transfer To Mailbox
Transfer To Node
Transfer To Operator
Hang Up
6-344), you will see a warning message and must program
Transfer Destination
None
None
None
None
None
None
Document number
None
None
Extension number
Mailbox number
Digit translation node number
None
None
Programming VM Applications