Phantom Device Issues - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:
Table of Contents

Advertisement

Troubleshooting
®
®
INTER-TEL
AXXESS
I.

PHANTOM DEVICE ISSUES

Table 7-14.
Phantom Device Troubleshooting Chart
Symptom
When adding more phan-
toms, the system slows
down.
Axxess v9.x or earlier nodes
cannot call an Axxess v11.0
phantom.
Endpoint displays INVALID
EXTENSION NUMBER and
swap endpoint fails.
When an administrator is
scrolling through a list of end-
points, the endpoint displays
CIRCUIT NONE.
A phantom cannot forward to
the public network.
A phantom cannot forward
off-node.
A phantom hunt group mem-
ber cannot forward to the
public network.
Page 7-50
MANUAL VERSION 11.0 – May 2008
Possible Cause
Adding too many phantoms
in the current database con-
figuration. Phantoms, though
they do not use physical
hardware, still use similar
processor resources as a
physical endpoint.
The off-node device for the
phantom does not exist on
the earlier node.
An administrator accessed
the swap endpoint operation
for a phantom device.
An administrator is accessing
administrator features for a
phantom device.
A phantom does not have
access to forward to the pub-
lic network.
The phantom is not in the
CO trunk group's outgoing
access list.
The phantom is not in the
node trunk group's outgoing
access list or node IP con-
nection group.
The local node does not rec-
ognize the off-node device.
Like other forwarded end-
points, hunt group members
cannot forward to the public
network.
Corrective Action
Remove some phantoms from the system.
On the earlier node, create an off-node device for
the v11.0 phantom extension. This will allow the
older node to recognize the phantom extension
and call it.
As designed, a phantom device cannot swap end-
points because it does not have a physical hard-
ware address.
As designed, there is no board:port:device number
for a phantom device because it does not have a
hardware address.
Enable the phantom's Manual Forward to Public
Network flag.
Assign the phantom's outgoing extension to the
corresponding outside access CO trunk group.
Assign the phantom's outgoing extension to the
corresponding outside access node trunk group or
IP connection group.
Create the off-node device on the local node.
Phantom hunt group members cannot forward to
the public network.
Phantom Device Issues

Advertisement

Table of Contents
loading

Table of Contents