Inter-Tel AXXESS Manual page 1054

Programming
® ®
INTER-TEL AXXESS
NOTE:
gency Extension (System\Numbering Plan\Emergency\Emergency Extension) is automatically
assigned as each station's Emergency Extension.
It shall be the responsibility of the entity or person(s) completing installation and mainte-
nance of hardware or software described herein to research, comply with and be responsi-
ble for the specific governmental rules and regulations regarding Emergency Outgoing
Access 911 [999] of the geographic location in which such functions are performed.
•
•
•
4.208 To change the assignment of one of the Associated Stations, use one of the following
methods:
Method A
1.
2.
3.
Method B
1.
2.
3.
4.
NOTE:
phone, the system automatically changes the ring-in type to Multiple (even when only one
device is selected). This occurs because the administrator can add multiple devices, which is
prevented if the ring-in type is Single.
Page 6-204
MANUAL VERSION 11.0 – May 2008
If using the DB Converter program to convert to a 7.0 or later system, the global Emer-
Outgoing Extension: Determine which trunk access (trunk, trunk group, or ARS) this
station will use when an idle CALL button or the OUTGOING button is pressed or
when a system speed-dial number is selected for dialing before a trunk is selected.
Defaults to Trunk Group 1 (92001). Stations cannot have direct outgoing access to
trunks on other nodes; they must use ARS to access off-node trunks.
Transfer Recall Destination: The transfer recall destination will receive this station's
transfer recalls. This can be a device located on another node if it is programmed as an
off-node device (see page
Voice Mail: This is the voice mail destination that this station will use for forwarding
calls to voice mail. If this field is not programmed for an Executive Display, Profes-
sional Display, or Model 8560 Phone, the phone will not have the voice mail-related
options on the feature button menu display.
Select the current Value and enter the new value in the text box.
Press . A screen appears showing you what is associated with the number you
ENTER
entered.
Select . The new number appears in the field.
OK
Right-click on the existing value. An option box appears.
Select . A window appears that asks you to select the type of device to include.
Change
Select device type and then select
them in a list by selecting the List button or view details by selecting the Details but-
ton.)
Highlight the device you want to assign as the associated extension and then select
. Your selection appears in the appropriate field.
ish
If the system administrator adds or changes ring-in devices using the administrator's
NOTICE
6-198).
. The list of devices appears. (You can view
Next
Fin-
Stations on the Local Node