Inter-Tel AXXESS Manual page 1095

4.343 Change Extension: To change the extension of the trunk, select the current value and
enter the new extension (or scroll to the desired number).
4.344 Batch Extension Change: To change several trunk extension numbers at once, high-
light the trunks you want to change. Then right-click and select
When the Get Extension screen appears, select the number you want to assign to the first high-
lighted trunk (the other trunks will be numbered consecutively after this number). When you
select
OK
NOTE:
To highlight two or more that are not consecutive, hold down CTRL while selecting the desired
items. (You may have to continue to hold SHIFT or CTRL while right-clicking to display the
option without changing the highlighted selections.)
4.345 Copy Trunk: To copy a trunk, right-click on the trunk extension and then select
To paste the programming information into another trunk, right-click the trunk where you want
the information pasted. Then select
select the attributes you want to copy. Select the desired attributes and click
4.346 CO Trunk Group Assignment: Trunks can be assigned to trunk groups on an individ-
ual basis. To place the trunk in a trunk group, use one of the following methods:
Method A
Select the current Value and enter the new value in the text box.
1.
Press
2.
entered.
Select
3.
Trunks
INTER-TEL
, the trunks are automatically renumbered and re-sorted in the station list.
To highlight a series of items, hold down SHIFT while selecting the first and last item.
Paste
. A screen appears showing you what is associated with the number you
ENTER
. The new number appears in the field.
OK
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
Batch Extension Change
. The Copy dialog box (shown below) allows you to
Programming
.
.
Copy
.
OK
Page 6-245
6