Inter-Tel AXXESS Manual page 1014

Programming
® ®
INTER-TEL AXXESS
•
•
NOTE:
member list changes.
Supervisors
4.26 (Hunt group supervisors cannot be off-node devices.) If the UCD Hunt Groups pre-
mium feature is licensed (see
as the hunt group supervisor(s). (An extension list can be included in the list of supervisors.) If
desired, a station can be assigned as the supervisor for more than one hunt group. If not using
Agent IDs, ACD hunt group supervisors with display endpoints will receive visual camp-on
displays if they are programmed as members of the hunt group and they have the ACD Agent
Logout feature enabled. If a Hunt Group is using ACD Agent IDs, the supervisor must be
logged on to the group to receive camp-on indications. If not using ACD Agent IDs, you can
add the supervisor as a hunt group member, set the Hunt Group flag for the supervisor's station
to "Remove," and the supervisor will still receive hunt group camp-on indications. To add or
delete supervisors, double-click on
Then do the following:
•
Page 6-164
MANUAL VERSION 11.0 – May 2008
Select the desired device type(s) and then select
c.
(You can view them in a list by selecting the List button or view details by select-
ing the Details button.)
NOTE:
To highlight a series of items, hold down SHIFT while selecting the first
and last item you want. To highlight two or more items that are not consecutive,
hold down CTRL while selecting the desired items.
Highlight the appropriate items and then select
d.
all the members, select
NOTE:
If you want to see the programming for a specific member, double-click on
its number to jump to its programming area.
To move a member to another location in the list: Drag and drop the member to the
new position. Or, highlight the member to move and press
to move the member up or down in the list.
To delete members: To delete one or more member from the list, highlight them and
press on your keyboard, or right-click and select
DELETE
A system reset is no longer required for UCD or ACD hunt groups after the hunt group
page
To add supervisors to the hunt group:
Right-click anywhere in the right side of the window. An option box appears.
a.
Select
b. Add To Supervisors List
type of device to include.
Select the station and/or extension list type(s) and then select
c.
tions/extension lists appears. (You can view them in a list by selecting the List but-
ton or view details by selecting the Details button.)
NOTE:
To highlight a series of items, hold down SHIFT while selecting the first
and last items you want. To highlight two or more items that are not consecutive,
hold down CTRL while selecting the desired items.
Next
Add Items
. Your selections appear in the list.
Finish
6-97), hunt groups can have one or more stations assigned
to see the current list of supervisors, if any.
Supervisors
. A window appears that asks you to select the
Programming Local Hunt Groups
. The list of devices appears.
. When you have added
+ the up/down arrow
CTRL
.
Remove Selected Items
. The list of sta-
Next