Inter-Tel AXXESS Manual page 1109

•
Automatic Board Equip: If this flag is enabled, all cards inserted into unequipped
slots are automatically detected and the slot is equipped to reflect the inserted card
when the system is powered up and a new programming session is started. (All ports on
inserted cards are unequipped.) This simplifies initial configuration, because all cards
can be installed into the equipment chassis and they will appear in DB Programming
automatically, reflecting the actual configuration of the system. In the default state, this
is Yes.
NOTE:
card type are not automatically detected and previous programming of cards and ports
is left intact when card types are changed in previously used slots. Therefore, you
should use local programming mode and delete any cards that exist in slots you want
automatically detected before beginning the direct or remote programming session.
The Auto Board Detect feature can only function when a DB Programming session is
not active.
If a board that is automatically equipped requires a premium feature to be turned on, the
system still equips the board. A Message Print error, however, is generated, indicating
that the premium feature is required. If this occurs, you must upload a software license
that has that premium feature enabled.
•
Barge-In Notification Display: This flag controls whether the agent sees the
IN IN PROGRESS
in or hangs up after barging-in. The default setting is
fication Display, set this flag to
No
•
Barge-In Notification Tone: When this flag is enabled (
parties (not including the supervisor) can hear a tone on every barged-in call. The tone
repeats at the frequency set by the Barge-In Notification Tone Frequency Timer (see
below). The default setting is
NOTE:
other party is on a node that is earlier than v9.0, the steal fails. The other party may be
another station or a trunk on a different node. The supervisor will see VERSION MIS-
MATCH STEAL REJECTED on his or her display.
•
Broadcast Alarms To All Administrators: Determine whether system alarms will dis-
play on all administrator stations (set to "yes"). If not, they will display only at the pri-
mary attendant's station (set to "no"). In the default state, this is set to Yes.
•
Broadcast Station Off-Hook Alarms: Determine whether off-hook alarms will be dis-
played on all administrator stations and the primary attendant's station (set to Yes). In
the default state, this is set to Yes.
•
Companding Type: Determine whether the system uses Mu-Law or A-Law compand-
ing.
•
Date Display Format: This flag determines the order the Day-Month-Year appear in
the system. This includes SMDR Header, Keyset Date Programming, and Message
Print. In the default state, it is set to Month-Day-Year.
•
DISA Transfer Tone: Select the ring or music option. If ring tones are enabled, callers
will hear ringing instead of music when using DISA to call a station. In the default
state, this is set to Ring.
System Flags
®
INTER-TEL
The Auto Board Detect function applies only to unequipped slots. Changes of
or
BARGE-IN TERMINATED
.
No
If the supervisor attempts to steal the other party away from the agent, and the
®
AXXESS MANUAL VERSION 11.0 – May 2008
display whenever a supervisor barges-
. To enable the Barge-In Noti-
Yes
. To disable the Barge-In displays, set this flag to
Yes
Yes
.
Programming
BARGE-
), each of the barged-in
Page 6-259
6