Station-Related Information; Account Codes - Inter-Tel AXXESS Manual

9.95 To delete a facility group from the list: To delete entries from the list, highlight them
and then right-click. Select
9.96 Audio for Calls Camped onto this Device: Defines the audio that a caller hears when
camped-on to the route group. To program this field, use the drop-down list to select the type
of audio and press
select
Board
the default extended value is 01:08 Central Processor.

10. STATION-RELATED INFORMATION

10.1 Station-related programming includes the following areas:
•
Account Codes (see below)
•
Attendants (see
•
Audio Diagnostics (see
•
Flags (see
•
Key Assignments (see
•
Message Centers (see
•
Messages (see
•
Primary Attendants (see
•
System Forwarding Paths (see
•
System Speed Dial (see
•
Keyset DB Programming Password (see
10.2 Each of these programming areas is described in detail in the following pages.
A. ACCOUNT CODES
10.3 There can be up to 500 account codes (5000 if using a CP Server). The default database
does not contain any account codes. Forced and Standard account codes may be individually or
batch created in DB Programming. Unneeded codes may be removed by right-clicking and
choosing Delete.
10.4 To program account codes, select Account Codes from the Station-Related Information
programming area. When you double-click on
•
Forced
•
None
•
Standard
•
Maximum Account Code Length
10.5 There can be up to 256 of each type of account code (512 in a quad-chassis system).
10.6 Maximum account code length can be up to 12 digits. Account codes can be of varying
lengths as long as they do not exceed the maximum. For example, if maximum length is four
digits, 1, 11, 111, and 1111 can be entered as separate account codes.
10.7 In a network, the system validates account codes against the account code table on the
user's node. The account code follows the call as it moves from node to node and appears on
every SMDR record associated with the call.

Station-Related Information

®
INTER-TEL AXXESS
Remove Selected Items
. Your options are Silence, Ticktone, Ringback, or Board. If you
ENTER
, specify the music source in the Extended Value field. The default is Board, and
page 6-303)
page 6-304)
page 6-305)
page 6-306)
page 6-314)
page 6-314)
page 6-315)
page
page 6-317)
®
MANUAL VERSION 11.0 – May 2008
.
6-316)
page 6-318)
, the following options appear:

Account Codes

Programming
Page 6-301
6