Inter-Tel AXXESS Manual page 1029

Hide thumbs Also See for AXXESS:

Table of Contents

4.88 Static Gateway: Enter the default IP address (do not include the periods) of the gate-

way that is used to access the port. By default, this is 192.168.0.1.

4.89 Static WINS Server: Enter the IP address (do not include the periods) of the WINS

server that the system uses for name resolution. By default, this is 0.0.0.0.

4.90 Telnet and Web Server: Enable these options to provide access to the Web and/or Tel-

net interfaces that are used for troubleshooting purposes. By default, these fields are both

4.91 Listening Port: Enter the port number that the CPC will use to process incoming

socket requests (e.g., for voice mail, OAI, DB Programming, etc.). The range is 1-65535, and

the default is 4000.

4.92 Web Listening Port: Enter the port number the CPC uses for Web access (i.e., for diag-

nostics). The range is 1-65535, and the default is 80.

port number assigned in the Board Utility (see

4.93 IP Address Assignment: BOOTP or DHCP: Enable one or both of these options to

assign a dynamic IP address to the CPC. If these flags are disabled, the CPC uses the IP

address identified in the Default Static IP Address field. By default, both of these flags are

using a BOOTP or DHCP server, the IP address may change, dropping any CT Gateway and/or

Voice Processing connections.

If using the IP port for the Board Utility, the Web Server option must be enabled.

If using the IP port for the Board Utility, the Web Listening Port number must match the

Inter-Tel recommends using the static IP address for the CPC (and CP Server). If

MANUAL VERSION 11.0 – May 2008

Chapters

Table of Contents