Feature Codes - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

C. FEATURE CODES

4.10 The feature codes are preset to carefully selected default values. Changing the codes

can cause existing assignments to be erased. For example, if 300, 305, and 306 are assigned as

feature codes and you attempt to assign 30 as another feature code, you would receive a warn-

ing message, because 30 makes up part of existing codes. The warning message allows you to

change the existing numbers (300, 305, and 306) individually or to leave the existing numbers

unchanged by selecting Cancel.

directory used by Desktop Interface devices that are installed on the system. Those directories

will have to be updated manually. However, any devices installed after the change will have the

new feature code information. Unlike feature codes, extension numbers are updated in the inter-

com directories when the devices are activated and when updates are requested.

4.11 To program individual feature codes: Select its current Feature Code and enter the

new number in the text box (or scroll to an available number). Feature code descriptions can-

not be changed.

4.12 To program several feature codes at once: Highlight the codes you want to change.

Then right-click and select

select the number you want to assign to the first highlighted feature code (the other highlighted

codes will be numbered consecutively after this number). When you select

codes are automatically renumbered and re-sorted in the list.

To highlight two or more items that are not consecutive, hold down CTRL while selecting the

desired items. (You may have to continue to hold SHIFT or CTRL while right-clicking to display

the option without changing the highlighted selections.)

4.13 For a complete list of the feature code and their descriptions, see

Feature Codes

If you change feature codes, they will not be automatically updated in the feature code

Batch Extension Change

To highlight a series of items, hold down SHIFT while selecting the first and last item.

MANUAL VERSION 11.0 – May 2008

. When the Get Extension screen appears,

, the feature

Table of Contents