Boards; Cleanup - Inter-Tel AXXESS Manual

Programming
® ®
INTER-TEL AXXESS
•
•

Boards

6.10 This test checks to make sure that each board has the proper entries in all corresponding
tables.
6.11 Possible Error Messages:
•
•
•

Cleanup

6.12 The Cleanup test detects and removes objects that are not in use. The following objects
are removed if not used:
•
•
•
•
•
•
•
•
Page 6-34
MANUAL VERSION 11.0 – May 2008
Mailbox x<extension> is associated, but has no corresponding device: In this case,
mailbox x1000 has an associated flag enabled. However, it does not have a valid corre-
sponding device with the same extension. This corruption is repaired by disabling the
associated flag. The Repair Status will be Set Associated Flag to false.
You have exceeded the maximum number of mailbox licenses: The database is cur-
rently programmed for the maximum number of licenses allowed. You cannot add any
more mailboxes. For additional licenses, contact your Inter-Tel dealer.
The board in slot <slot number> has no records in <table name>: In this case, the
board is required to have records in its table. However, none exist. This corruption is
repaired by adding default records to the table. The Repair Status will either be Record
Added if one record was added or Records Added if more than one record was added.
The board in slot <slot number> has an incorrect number of records in <table
name>: In this case, the board does not have the proper number of records in its table.
This corruption is repaired by adding default records to the table. The Repair Status will
be Records Added.
The board in slot <slot number> has an incorrect record sequence in <table name>:
In this case, the board has the proper number of records in the table. However, the
sequence numbers are incorrect. For example, the records should be numbered 1
through 10. However, they are numbered 0 through 9. This corruption is repaired by
deleting the record that has an out-of-bounds sequence number and adding a default
record for the each missing sequence number. In the given example, record 0 would be
deleted and record 10 would be added. The Repair Status will be Added/Deleted
Records, Deleted Records, or Records Added depending on the action that was taken.
Hunt Groups
Facility Groups
Route Groups
CO Trunk Groups
Page Zones
Standard Account Codes
Forced Account Codes
System Speed Dials
Boards