Inter-Tel AXXESS Manual page 1527

If the upgrade includes consolidating nodes via ATM and the system has a CT Gateway,
4.
delete the nodes that are being merged into a single node from the CT Gateway. For
example, if you are consolidating nodes 1-4 into node 1, delete nodes 2-4 in the CT
Gateway using the
Stop the Attendant Console applications that are connected to the CT Gateway.
5.
Stop all other CT applications that are connected to the CT Gateway.
6.
Stop the CT Gateway. If the CT Gateway is running as a service, you must stop the
7.
Gateway using the Service Control Manager of the Control Panel.
Install the new DB Studio software on the programming PC and convert the saved data-
8.
base using DB Converter.
NOTE:
ever upgrading the system software. Do NOT rely on the backup database stored in the
CPC flash memory. Using the flash database for upgrades may result in database con-
flicts. Run the DB Test utility to verify that the conversion was successful.
If you are uninstalling previous versions of Database Programming, the Remove Shared
Component dialog box may appear prompting you whether you want to remove shared
files that are no longer used by any programs. Click
example of the Remove Shared Component dialog box is shown below.
Upgrade the CP Server:
9.
Version 11.0 Upgrade Instructions
INTER-TEL
Delete Connection
Inter-Tel recommends that you convert the database using DB Converter when-
•
If using an NT-based CP Server, install the latest Service Packs and security
®
updates from Microsoft
NOTE:
Inter-Tel does not support field upgrades from an NT-based server to a
2000-based server.
•
If using a 2000-based CP Server, uninstall the "PCI PC Watchdog" driver for the
Watchdog Timer Card and install the new driver. After installed, you can load the
latest Service Packs security updates and critical updates from Microsoft.
NOTE:
The "PCI PC Watchdog" driver for the Watchdog Timer Card does not sup-
port Service Packs 3 and 4. Attempting to install these Service Packs before
upgrading the driver may result in a PC failure. See the latest version of the
Upgrade Instructions for the Berkshire PC Watchdog Timer Card Driver (document
part number 835.2735) available on the edGe for more information. For readers
located in Europe, contact the Inter-Tel Europe office for technical information.
Appendix E — Upgrading to v11.0
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
option under the File menu.
No to All
.
to retain all the files. An
Page E-5