Inter-Tel AXXESS Manual page 1041

NOTE:
when you click Delete, instead the entire node is deleted along with all of the devices.
Node Trunk/IP Connection Groups
4.143 Each node has a list of node trunk or node IP connection groups that are used to access
the remote node. The node IP connection groups correspond to an IP connection between a
remote node and a local node. For each node in the network, you must define the routes to
every other node. For example, in a network with four nodes, you would define three routes for
each node (one to each of the other three nodes). See
of node programming. To program the node trunk or node IP connection groups included in
this node, double-click on
4.144 To add trunk or IP connection groups to the list: Note that this is an ordered list.
Place the trunk or IP connection groups in the list in the order you want them to be accessed
when the hunt group receives a call.
To add to the bottom of the list: Do not highlight any existing trunk or IP connection
1.
groups and right-click anywhere in the right side of the window. An option box appears.
To add to the list above an existing trunk group: Highlight the trunk or IP connection
group and then right-click. An option box appears.
Select
2.
you to select the type of device to include.
Select
3.
appears. (You can view them in a list by selecting the List button or view details by
selecting the Details button.)
NOTE:
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
Highlight the appropriate items and then select
4.
the node trunk groups necessary, select
NOTE:
extension number to jump to its programming area.
4.145 To move a trunk or IP connection group to another location in the list: Drag and
drop the trunk or IP connection group to the new position. Or, highlight the trunk or IP connec-
tion group to move and press
group up or down in the list.
4.146 To delete a trunk group from the list: Highlight the trunk or IP connection group(s)
and then right-click. Select
Remote Nodes
INTER-TEL
The dialog box does not allow you to select a single device and delete it from the node
Node Trunk/IP Connection Groups
Add To Node Trunk/IP Connection Groups List
or
Node Trunk Group Node IP Connection Group
To highlight a series of items, hold down SHIFT while selecting the first and last
If you want to see the programming for a specific item, double-click on its
+ the up/down arrow to move the trunk or IP connection
CTRL
Remove Selected Items
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
Appendix A — Networking
and then do the following:
. A window appears that asks
and then select
. When you have added all
Add Items
. Your selections appear in the list.
Finish
.
Programming
for a sample
. A list
Next
Page 6-191
6