Windows Network Login; Windows Networking Username; Windows Networking Domain; Windows Networking Password - Inter-Tel AXXESS Manual

M. WINDOWS NETWORK LOGIN
2.31 The following information is used by the Voice Processor service when it logs on to the
network. See
NOTE:
work domain, username, and password. Unfortunately, Microsoft is not guaranteeing compatibil-
ity with new releases of their software. This renders information encrypted under one release
unreadable under the next release. To avoid this problem, Inter-Tel has completely discarded
Microsoft's encryption scheme in system versions 4.4 and later. Therefore, because version 4.3
Voice Processing databases use the Microsoft encryption scheme, any upgrade from 4.3 to a
later version will require the installer to re-enter these three fields of the network account infor-
mation. However, once the Voice Processing Unit is upgraded from 4.3 and the network infor-
mation is re-entered and saved using Inter-Tel's encryption scheme, any further system
upgrades will automatically update these fields.
ALSO:

Windows Networking Username

2.32 To change the username, click once on the current Value. When the text box appears,
type the username that the Avdap service user account will use to log on to the network in the
text box. Then press

Windows Networking Domain

2.33 In this field, enter the name of the network domain in which the Voice Processing PC is
a member. To change the domain name, click once on the current Value. When the text box
appears, type the name in the text box. Then press
change.

Windows Networking Password

2.34 This field specifies the network password for the Avdap service user account. Right-
click on
shown below.
Enter the current password, if one exists.
1.
Enter the new password (up to 40 characters) in the New Password box. The characters
2.
will not appear on the screen when typed; they will appear as asterisks (***).
Retype the password exactly as before in the Confirm Password box.
3.
Select
4.
return to the Password field. If not, you must re-enter the new password and verify it
again. If you make a mistake while entering the password or want to leave it
unchanged, select

Windows Network Login

INTER-TEL
page 3-230 for information about setting up the Avdap user account.
Axxess version 4.3 used Windows NT-supplied encryption libraries for storing the net-
This section is not applicable to Enterprise Messaging.
or click on another field to save the change.
ENTER
Windows Networking Password
to exit and save the password. If the entered passwords match, you will
OK
.
Cancel
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
or click on another field to save the
ENTER
and select
Edit Password
Programming
. A window appears as
Page 6-351
6