Unified Messaging; Number Of Voice Channels - Inter-Tel AXXESS Manual

Programming
® ®
INTER-TEL AXXESS
C. NUMBER OF VOICE CHANNELS
12.11 Voice channels allow communication between the telephone system and the applica-
tions. If a voice channel is not available in an application's time slot group, callers to that
application will receive busy signals and the call will be sent to the application's attendant.
12.12 At default there are four available voice channels. The actual number of voice channels
may be higher or lower depending on the number of Voice Processing Cards used and the port
configuration of the Voice Processing Cards.
12.13 The number of available voice channels determines the maximum number of channels
that can be assigned to any single Time Slot Group. The combined total of channels assigned
to Time Slot Groups may exceed the actual number of voice channels, because it is unlikely
that all time slot groups will use their maximum allotment at once.
12.14 To set the number of voice channels:
1.
2.
NOTE:
ing using the Windows-based platform currently supports a maximum of only 40 ports. Attempt-
ing to configure 64 voice mail ports may cause serious performance issues.

13. UNIFIED MESSAGING

13.1 This folder is only applicable to Enterprise Messaging voice processors, which support
Unified Messaging. If the folder is selected for other Voice Processor types, a warning appears
and all the fields appear with a red "X."
13.2 For complete information about Unified Messaging OSE, refer to the latest version of
the Unified Messaging Open Standards Edition Administrator's Guide (document part no.
835.3162).
13.3 To program the Unified Messaging fields:
1.
2.
3.
Page 6-430
MANUAL VERSION 11.0 – May 2008
Click on the current Value and enter the new information in the text box.
Press or click on another field to save your change.
ENTER
Although DB Programming allows you to configure 64 voice mail ports, Voice Process-
Go to Voice Processor –

Unified Messaging

Configure the following fields:
•
Attachment Format for Inbound Faxes: Indicates the format of fax attachments
in e-mails sent for Inbound faxes. The available options are TIF or PDF. It is set to
TIF by default.
•
Enable Delivery of Incomplete/Failed Inbound Faxes: Enables e-mail notifica-
tion for fax receivers regarding failed or incomplete inbound faxes. It is set to No
by default.
•
Enable IMAP Login for EM Server: Enables remote IMAP logins to the EM
server. It is set to No by default.
•
EM Server IMAP Connection Timeout: Determines the maximum duration that
the Em server will wait for a remote IMAP connection to be established. The
range is 30–1440 minutes; the default is set to 30 minutes.
Press or click on another field to save the change.
Enter
.

Number of Voice Channels