Inter-Tel AXXESS Manual page 1480

Appendix C — CP Server
® ®
INTER-TEL AXXESS
•
•
•
•
Page C-32
MANUAL VERSION 11.0 – May 2008
Window Menu: The Window menu has no selectable options when no sockets are
active. When at least one socket is active, the following options are available.
— Cascade: Arranges all windows in a cascade fashion from the upper left to the
lower right and back again.
— Tile: Arranges all windows to be visible on the screen at one time. The size of the
each window is dependent on the number of active connections.
— Arrange Icons: Not used in this application.
— Active Window List: Contains a list of all active windows in the application. Select
a window to make it the active window.
System Monitor Menu: This menu option is only available when a System Monitor
socket is active. Because only trained personnel should use the options in this menu, the
menu options are not discussed in this document.
Help Menu: the Help menu has the following options:
— About Diag Mon: Displays a dialog box with version and copyright information
about Inter-Tel Diagnostics Monitor.
— How To Use Diag Mon: Displays the online help file.
Context Menu: You can access the Context Menu by right-clicking on a window. The
Context menu provides quick access to the following four basic functions that you can
perform on an active socket connection:
— Clear Buffer: Clears the entire contents of an active socket window. Any data cur-
rently logged to a file will remain logged in that file.
— Pause Scrolling: Pauses the scrolling of the buffer to allow you to look over the
contents of the buffer. (On occasion, data may be coming out of the socket faster
than you can read the data.) When Pause Scrolling is enabled, a check mark will
appear next to the menu item.
— Save to File: Saves the contents of the active socket connection to a file for later
review. This can also be accessed using
— Log to File: Saves the current contents of the active socket connection to a file and
logs any future inputs from the socket connection into the file as well. Selecting
this option again will turn off the logging feature. If logging is active for a socket
connection, a check mark will display next to the menu option. This can also be
accessed using
CTRL+L
.
CTRL+S
.
Diagnostics Monitor Utility