Minor Alarms That Are User Correctable - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

Troubleshooting

4.12 For example, suppose you have a three-node network: node 1 running 8.0; node 2 run-

ning 8.2; and node 3 running 8.2. Node 1 then generates two network alarms, one immediately

after the other. At this point, node 1 shows one network alarm (the latest) and nodes 2 and 3

show two network alarms. Node 1 then clears the alarm, and a broadcast message is sent. Node

1 now shows no alarms, but nodes 2 and 3 still show the first alarm. Node 2 then clears the

first alarm, but a broadcast message is NOT sent. Now nodes 1 and 2 show no alarms, but node

3 still has one in the queue. This alarm will stay in the queue until node 3 clears it or until the

alarm is overwritten as previously described.

4.13 The following table shows which alarms have a numbered priority.

B. MINOR ALARMS THAT ARE USER CORRECTABLE

4.14 Minor alarm numbers 000-019 are reserved for system problems that can be corrected

without calling service personnel. These alarm messages (as they appear in the error message

printout) currently include:

MANUAL VERSION 11.0 – May 2008

Alarms with a Numbered Priority

000 Alarm Automatically Cleared – The alarm was automatically cleared.

001 Alarm Manually Cleared 'Ext. xxxxx'– An administrator entered the Clear

Alarm feature code (9850) and cleared the alarm manually.

002 Network Alarm Automatically Cleared – The network alarm was automatically

003 Network Alarm Manually Cleared 'Ext. xxxxx'– An administrator entered the

Clear Network Alarm feature code (9851) and cleared the alarm manually.

Minor Alarms That Are User Correctable

Table of Contents