Table 6-36 Default Programmable Buttons - Inter-Tel AXXESS Manual

—
10.33 The default values for the programmable buttons are shown in the chart below.
Table 6-36:
Key Assignments
®
INTER-TEL
Method A
Select the current Value and enter the new value in the text box.
1.)
Press . A screen appears showing you what is associated with the
2.) ENTER
number you entered.
Select . The new number appears in the field.
3.) OK
Method B
Select
1.) Change Selection
to include.
Select the type (feature code, station, etc.) and then select
2.)
appears. (You can view them in a list by selecting the List button or view
details by selecting the Details button.)
Highlight the appropriate item and then select
3.)
in the Selection field.
Ring When: This field allows the station to receive a burst of ringing when a cer-
tain number of calls are present at a primary station, and at least one call is ringing
or camped on. The ring burst will repeat periodically as long as the programmed
number of calls are present at a primary station. (This period is determined by the
DKTS Secondary Extension Key Alerting Tone timer.) If this field is set to 0, the
secondary station will never receive the burst of ringing. To set this number, select
the current Value and scroll to or enter the new value in the box. Then press
or select another field to save the change.
ENTER
Default Programmable Buttons
BTN # Key Type
01 Feature Key
02-06 Undefined
07 Feature Key
08 Feature Key
09 Feature Key
10 Feature Key
11 Feature Key
12 Feature Key
13 Feature Key
14-16 Undefined
17 Feature Key
18 Undefined
19 Page Zone
20 Feature Key
21-35 Undefined
®
AXXESS MANUAL VERSION 11.0 – May 2008
. A window appears that asks you to select the type
Finish
Code
372 Do-Not-Disturb
None None
5 Conference
336 Individual Hold
345 Transfer To Ring
381 System Speed Dial
380 Redial
7 Page
6 Queue Request
None None
313 Background Music
None None
9601 Zone 1
382 Station Speed Dial
None None
Programming
. A list
Next
. Your selection appears
Feature
Page 6-313
6