Co Trunk Groups - Inter-Tel AXXESS Manual

Programming
® ®
INTER-TEL AXXESS
4.278 Hardware Handshaking: If the device that is connected to the selected port supports
handshaking on the RS232 connector, enable the Hardware Handshaking flag. See
— RS232, for information about handshaking. Enable this flag by selecting the current Value
and then selecting the check box to place a check in it. Then press
field to save the change. (To remove the check and disable the flag, select the check box
again.)
4.279 Software Handshaking: If the device that is connected to the selected port supports
software handshaking, enable the Software Handshaking flag. See
more information. Enable this flag by selecting the current Value and then selecting the check
box to place a check in it. Then press
remove the check and disable the flag, select the check box again.)
4.280 Autobaud: To allow the bit rate to be automatically adjusted, enable this flag by select-
ing the current Value and then selecting the check box to place a check in it. Then press
ENTER
select the check box again.)
P.

CO TRUNK GROUPS

4.281 When you select CO Trunk Groups, the right side of the screen displays the list of trunk
groups on the Local node. At this level, you can program the description and username for
each trunk group. To program the other fields for an individual trunk group, double-click on it
to view these options:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Page 6-228
MANUAL VERSION 11.0 – May 2008
or select another field to save the change. (To remove the check and disable the flag,
Trunks (see page 6-230)
Multiple Ring-In (see page
Answer Access (see page
Emergency Outgoing Access (see
Outgoing Access (see page
Toll Restriction (see page
Search Algorithm (see page
Audio for Calls Camped onto this Device (see
Music-On-Hold (see page
Audio on Transfer to Ring (see
Audio on Transfer to Hold (see
Audio On Hold For Transfer Announcement (see
PRI Call By Call (see page
One-Way Incoming Only (see
Echo Trunk Number (see
Enable Hookflash (see page
Camp-Ons Allowed (see page
ISDN Data Calls Allowed (see
Day and Night Ring-In Type (see
Send Station Caller ID to Attached PBX (see
Propagate Original Caller ID (see
or select another field to save the change. (To
ENTER
6-230)
6-230)
page 6-231)
6-232)
6-232)
6-234)
page 6-234)
6-234)
page 6-235)
page 6-235)
page
6-235)
page 6-236)
page 6-237)
6-237)
6-237)
page 6-237)
page 6-237)
page 6-239)
page 6-240)
Appendix B
or select another
ENTER
Appendix B — RS232
6-235)
CO Trunk Groups
for