Inter-Tel AXXESS Manual page 1111

•
Music On Hold For IC Calls: This option determines whether a user hears music
when placed on hold by another station or when camped onto a resource. If set to No,
IC callers never hear music, although they may hear other tones such as tick tone and
ringback. In the default state, this is Yes.
•
Network with United States (for Europe only): The U.K. allows the capability to net-
work U.S. and U.K. systems together using the Inter-Tel IP Networking Module (previ-
ously called InterPrise 3200N) Products. In the default state, this is No.
When this flag is set to No, no U.S. nodes can be added to the U.K. network.
When this flag is set to Yes, aU.K. system can network with a U.S. system.
NOTE:
v1.3 or higher.
•
OHVA Enable: Determine whether the Off-Hook Voice Announce (OHVA) feature
will be enabled system-wide. In the default state, this is Yes.
•
Play Pre-Record-A-Call Message: This flag enables the Voice Processor to play a
message before the Record-A-Call message.
•
Receive Network Alarms: This flag determines whether the node will receive and dis-
play network-wide alarms sent by other nodes in the network. In the default state, it is
No.
•
Record-A-Call Display: This flag determines whether phone users will see the Record-
A-Call displays when the feature is used. In the default state, this flag is set to Yes.
•
Record-A-Call Tone: This flag determines whether the parties on a call will hear a tone
when the Record-A-Call feature is in use. The timing of the tones are determined by the
Record-A-Call Tone Interval timer, described on
Yes.
•
Ring Flash On DSS Lamps: When enabled, this option allows DSS/BLF buttons to
indicate a ringing call to a station by showing the ring flash on the associated button. If
disabled, the button will show that the station is busy (solid lamp). In the default state,
this is set to Yes.
•
Send Network Alarms: This flag determines whether a node will broadcast alarms that
occur on that node to the rest of the network. In the default state, this is set to No.
•
Single Idle Time for All Hunt Groups: This flag invokes an Automatic Call Distribu-
tion (ACD) algorithm that sends an incoming call to the agent station with the longest
idle time in all the hunt group queues to which that station belongs. For agent stations
belonging to multiple hunt groups, this feature allows calls to be distributed to other sta-
tions having the longest idle time, regardless of the station idle time status in an individ-
ual hunt group. It is set to No by default.
•
SLC Ring Zones: In some installations, where more than one single-line device is con-
nected in series to an SLC circuit, zoned ringing may be necessary. The system can sup-
port devices with 3 Ringer Equivalences (REs) per circuit. However, the system can
only ring eight REs at once. Therefore, if there are more than eight REs on any SLC,
the system-wide SLC Ring Zones flag must be enabled to allow the single-line devices
to ring in smaller groups (zones). In the default state this flag is disabled.
System Flags
®
INTER-TEL AXXESS
The U.S. and U.K. network must use the IP Networking Module products at
Programming
®
MANUAL VERSION 11.0 – May 2008
page 6-329. In the default state, this is
6
Page 6-261