Configuration Procedure - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

Appendix C — CP Server

22. CONFIGURATION PROCEDURE

22.1 The Configuration Utility allows you to change various aspects of the CP Server includ-

tion except the MAC Addresses of the PCMA cards. However, because this will drop all calls in

progress, do not restart the CPU during normal business hours.

22.2 The default path to the utility is: C:\ICP\Utilities\icpconfig.exe.

22.3 The Configuration Utility automatically runs during the CP Server installation. To make

changes after the software is installed, double-click on the desktop icon. Or, select Start - Pro-

grams - Inter-Tel - Call Processing -

ration Utility to program the necessary fields, as described below and in the following pages.

MANUAL VERSION 11.0 – May 2008

Default directories, backup file counts, and other user-configured information

Fields necessary for the proper operation of the CP Server (For example, if the system

is a quad system, then the quad configuration check box needs to be enabled.)

IP Address of the remote chassis and Listening Socket PC

MAC Address of the PCMA cards for ATM systems

You must restart the call processing unit to apply any changes made to the configura-

. You can then use the Configu-

ICP Configuration Utility

Configuration Procedure

Table of Contents