Inter-Tel AXXESS Manual page 1134

Programming
® ®
INTER-TEL AXXESS
4.
9.14 To delete: To delete one or more item from the list, highlight them and then right-click.
Select
9.15 Dialing Patterns: (COS 02-16 only) To change the dialing patterns for the class of ser-
vice, double-click on
9.16 To add a dialing pattern to the class of service:
1.
2.
9.17 To delete a dial pattern from the class of service: To delete one or more pattern from
the list, highlight them and then right-click. Select
NOTE:
you want. To highlight two or more items that are not consecutive, hold down CTRL while
selecting the desired items.
9.18 To move a pattern to another location in the list: Drag and drop the pattern to the
new position. Or, highlight the pattern to move and press
the pattern up or down in the list.
9.19 To program the digits for a pattern: Select the current Value for the pattern and enter
the new digits in the text box. Then press
9.20 Allow Dialing Patterns: If you want the dialing patterns (programmed above) to be
"allowed" patterns, enable this flag. If you want them to be "restricted" patterns, disable the
flag. You can enable the flag by selecting the current Value and then selecting the check box to
place a check in it. Then press
the check and disable the flag, select the check box again.)
Page 6-284
MANUAL VERSION 11.0 – May 2008
NOTE:
To highlight a series of items, hold down SHIFT while selecting the first and last
items you want. To highlight two or more items that are not consecutive, hold down
CTRL while selecting the desired items.
Highlight the appropriate items and then select
the devices select . Your selections appear in the list.
Finish
NOTE:
If you want to see the programming for a specific item, double-click on its
extension number to jump to its programming area.
.
Remove Selected Items
Dialing Patterns
To add to the bottom of the list: Do not highlight any existing patterns and right-click
anywhere in the right side of the window and select
space, press ). A blank pattern appears at the bottom of the list.
CTRL+N
To add to the list above an existing device: Highlight the device below the location
where you want the new entry and then right-click. Then select
pattern appears above the pattern you highlighted.
To highlight a series of items, hold down SHIFT while selecting the first and last items
ENTER
Add Items
to view the current list. Then do the following:
Add To List
Remove Selected Items
+ the up/down arrow to move
CTRL
or select another field to save the change.
ENTER
or select another field to save the change. (To remove
. When you have added all
(if there is no blank
. A blank
Add To List
.
Classes Of Service (COS)