Table 6-34 Default Dial Patterns (Europe) - Inter-Tel AXXESS Manual

For European Systems:
Facility Group Default Values
9.57
rules that are needed with its trunks. The default values of the pre-programmed facility groups
are as follows. All facility groups are programmable.
For U.S. Systems:
•
Local (P1500): This group uses Trunk Group 1 and Dial Rules 3 and 4.
•
Toll Local (P1501): This facility group uses Trunk Group 1 and Dial Rules 2 and 4.
•
Toll Long Distance (P1502): This facility group uses Trunk Group 1 and Dial Rules 1,
2, 3, and 4.
•
Operator (P1503): This facility group uses Trunk Group 1 and Dial Rules 1, 2, 3, and
4.
•
International Station-to-Station (P1504): This facility group uses Trunk Group 1 and
Dial Rules 1, 2, 3, 4, and 7.
•
International Operator (P1505): This facility group uses Trunk Group 1 and Dial
Rules 1, 2, 3, 4, and 7.
For European Systems:
•
Local (P1500): This group uses Trunk Group 1 and Dial Rules 1 and 2.
•
National (P1510): This facility group uses Trunk Group 1 and Dial Rules 1 and 2.
•
Operator (P1512): This facility group uses Trunk Group 1 and Dial Rules 1 and 2.
•
International (P1513): This facility group uses Trunk Group 1 and Dial Rules 1 and 2.
9.58 Each facility group has a list of trunk groups and/or node trunk groups that will be used
for routing calls. For example, the "Local" facility group would contain trunk groups that
include local trunks, but the "Los Angeles" facility group might have node trunks groups that
include local trunks on a node in Los Angeles.
9.59 Facility groups must be placed in the Ordered List Box in the order that they should be
selected. Make sure that the facility groups being used contain the proper type of trunks (local,
FX, WATS, long distance, etc.) for the calls that will be routed.
Facility Group Default Values
INTER-TEL
Table 6-34:
Default Dial Patterns (Europe)
Route Group #
Local (1001)
Toll Local (1004)
Toll Long Distance (1011)
Operator (1013)
International Station-to-Station (1014)
International Operator (1015)
Facility groups determine the trunk groups that will be used to route calls and the dial
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
Dial Pattern(s)
N+
TN11, TXXXXXXX
[Q]TNXXXXXX+
[Q]RN+, [Q]RR, [Q]R
[Q]011+
[Q]01+
Programming
Page 6-295
6