Table C-1 Cp Server System Capacities; System Capacities - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

The following table defines the capacities available when using a CP Server.

Forced and Standard Account Codes

System Speed Dial Numbers

ACD Agent IDs

ARS Route Groups

Number of Facility Groups in a Route Group

Off-Node Devices

Call Routing Table Patterns

Extension List Capacity

Maximum Page Zone Recommendation

Maximum All-Ring Hunt Group Recommendation

Networking Internet Protocol Resource Cards (IPRCs or IPRC-Ds)

This value is based on an eight-chassis ATM System. If using the CP Server with a non-ATM sys-

tem, the maximum number of devices is 1024.

The maximum number of call routing table patterns depends on the number of digits that are trans-

lated (i.e., received from the CO). For example, if receiving ten digits, the maximum is approxi-

mately 2380 patterns; if receiving four digits, the maximum is approximately 2767.

not. Therefore, the number of devices is only limited by the hardware configuration in the Data-

base (DB) Programming.

System Capacities

CP Server System Capacities

Even though a non-ATM database supports 1024 devices, the equipment chassis can-

Appendix C — CP Server

MANUAL VERSION 11.0 – May 2008

50 (9600-9649)

5000 (0-4999)

40,000 devices

Chapters

Table of Contents