Inter-Tel AXXESS Manual page 1545

10.4 Figure F-1 depicts the configurations of endpoints programmed for the three NAT
Types in DB Programming.
Figure F-1. Endpoint Configurations for Native, NAT, and Auto NAT Types
the Axxess Native IP Address
(one IP address per IPRC)
10.5 To set up Near-End NAT Traversal for IP Endpoints on an Axxess system:
Configure the firewall/NAT device for a static mapping. This associates a public IP
1.
address with the IPRC native private address.
NOTE:
described in "Port Usage Summary" on
wall defaults its security, failure to configure the security may result in no-audio condi-
tions or security vulnerabilities.
In the System – Devices and Feature Codes – IP Connections folder, program the NAT
2.
IP Address to be the public address that was associated with the native private address
in
In the System – Devices and Feature Codes – Stations folder, create an IP endpoint and
3.
specify the MAC address (or device ID).
Endpoint Configurations for Native, NAT, and Auto NAT Types
INTER-TEL
Configure the firewall security settings for the newly mapped IP address(es) as
step 1 above.
Appendix F – Network Topology
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
(one IP address per IPRC)
page F-20. Depending on how the particular fire-
Axxess
Page F-15