Inter-Tel AXXESS Manual page 1433

Hide thumbs Also See for AXXESS:

Table of Contents

System OAI: System OAI Applications that support networking can be used in con-

junction with the CT Gateway/Transceiver. (For detailed information about the Gate-

way/Transceiver, see

ate properly on an Inter-Tel system that is part of a network, even with a Gateway and

Transceiver. This is because those applications are not designed to track calls that

cross over from node to node within a network. Those System OAI applications can

only be used on stand-alone Inter-Tel systems that are not part of a network.

Inside Track: Inside Track does not recognize the "NET" SMDR call type and treats it

as an invalid record. Otherwise, Inside Track will work exactly as it did for previous

system versions.

Network Operation of System Features

Messages may not be printed in time sequence order on remote nodes. The order

of an incoming message print depends on how the message print was routed to the

destination node. Therefore, a message print could possibly arrive at the destina-

tion message print node out of order.

in INSTALLATION.)

The Gateway allows a single System OAI application to support a multi-node net-

work. A single RS232 connection is used for communication with every node in

the network (each node also requires a Transceiver). Each application will require

a separate Gateway.

System versions 8.0 and later require version 3.0 or later CT Gateway soft-

The Transceiver enables the Gateway to connect to each node of a network via the

Local Area Network (LAN). Transceivers allow the Gateway to communicate

with multiple nodes regardless of the number of serial ports available on the Gate-

way PC and regardless of the physical distance between the Gateway PC and the

Inter-Tel switch.

Some System OAI applications, that do not support networking, will not oper-

Appendix A — Networking

MANUAL VERSION 11.0 – May 2008

Chapters

Table of Contents