Inter-Tel AXXESS Manual page 1075

Secondary Language
4.262 There is a new field added to each station in the system called "Secondary Language."
This field corresponds to the Change Language feature (301). This feature used to toggle
between the System Primary Language and the System Secondary language. It now toggles
between the System Primary Language and the station's Secondary Language, or can specify a
language. This allows any station in the system to have its own secondary language or use the
System Secondary Language, giving the system the ability to support more than just two lan-
guages.
4.263 If a station's Secondary Language field is programmed to be Use Primary Language the
Change Language feature will do nothing because the station will toggle between the System
Primary Language and the station's Secondary Language, which is the System Primary Lan-
guage.
4.264 If a station's Secondary Language field is programmed to be Use Secondary Language
the Change Language feature will act like version 5.2 and toggle between the System Primary
Language and the station's Secondary Language, which is the System Secondary Language.
This is the system default.
4.265 If a station's Secondary Language field is programmed to be Japanese the Change Lan-
guage feature will toggle between the System Primary Language and the station's Secondary
Language, which is Japanese.
4.266 The Language field for stations indicates what language the station is currently set to.
This field used to toggle between the Use Primary Language and Use Secondary Language. It
can be set to any specific language along with the Use Primary Language and Use Secondary
Language. The side-effect of changing the Language field is that if you change it to Japanese
and the station's Secondary Language field is set to Spanish (Mexico City Spanish Dialect for
VPU and EVMC, American Spanish Dialect for EM), then the user will have no way to get
back to Japanese if they enter the Change Language feature code. This is because the first time
the user enters the feature code, the system will toggle the station to the Use Primary Lan-
guage. The next time the user enters the feature code, the system will toggle the language to
the station's Secondary Language, which is Spanish. To avoid this situation, simply change the
station's Secondary Language to Japanese and the station's Language field to Japanese.
NOTE:
across nodes unless all nodes in the system are at least 5.2F6 or newer since the older sys-
tems do not understand specific languages and expect to receive only Primary Language or
Secondary Language values.
Speakerphone Type
4.267 This flag affects Digital Phones differently:
•
Executive Display or Professional Display Phone: To enable the keyset's integrated
speakerphone, to be used in standard and/or enhanced mode, select either of the speak-
erphone options (Enhanced or Standard). Selecting Standard does not prevent the Exec-
utive Display Phone user from using the enhanced speakerphone. To disable the
Executive Display Phone's speakerphone, select
•
Standard Display, Basic Digital, Associate Display, Basic, Model 8560, Model 8520, or
Model 8500 Phone: If the station will have access to shared standard speakerphone
resources, select Standard. For access to enhanced and standard speakerphone
resources, select Enhanced. To prevent a Standard Display, Basic Digital, Model 8500,
Model 8520, or Model 8560 Phone station from using shared speakerphone resources,
select
Stations on the Local Node
INTER-TEL
Setting a station's Secondary Language field to a specific language will not work
.
Disabled
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
.
None
Programming
Page 6-225
6