Honda Accord 2008 Manual page 610

07/11/02 09:14:25 61TA0000_110_0291
14. Turn the ignition switch to ON (II).
15. Reset the ECM/PCM with the HDS.
16. Clear the CKP pattern with the HDS.
17. Do the ECM/PCM idle learn procedure (see page
11-343).
18. Do the CKP pattern learn procedure (see page 11-5).
19. Test-drive at a steady speed between 19 38 mph
(30 60 km/h) for 10 minutes. −
20. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0341 indicated?
YES − Check for poor connections or loose
terminals at the VTC oil control solenoid valve and
the ECM/PCM, then go to step 1.
NO − Go to step 21.
21. Monitor the OBD STATUS for DTC P0341 in the
DTCs MENU with the HDS.
Does the screen indicate PASSED?
YES − Troubleshooting is complete. If any other
Temporary DTCs or DTCs were indicated in step 20,
go to the indicated DTC's troubleshooting.
−
NO If the screen indicates FAILED, check for poor
connections or loose terminals at the VTC oil
control solenoid valve and the ECM/PCM, then go
to step 1. If the screen indicates NOT COMPLETED,
go to step 19.
−
11-291