Subaru LEGACY 2006 Manual page 4296

asieps_tobira.book 7 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Aluminum Wheel
WHEEL AND TIRE SYSTEM
4. Aluminum Wheel
A: REMOVAL
Refer to "Steel Wheels" for removal procedure of
aluminum wheels. <Ref. to WT-6, REMOVAL,
Steel Wheel.>
B: INSTALLATION
Refer to "Steel Wheels" for installation procedure of
aluminum wheels. <Ref. to WT-6, INSTALLATION,
Steel Wheel.>
C: INSPECTION
Refer to "Steel Wheels" for inspection procedure of
aluminum wheels. <Ref. to WT-6, INSPECTION,
Steel Wheel.>
Rim runout:
Axial runout limit Vertical runout limit
1.0 mm (0.039 in)
D: CAUTION
Aluminum wheels are easily scratched. To main-
tain their appearance and safety, be careful of the
following:
1) Do not damage the aluminum wheels during re-
moval, installation, wheel balancing, etc. After re-
moving aluminum wheels, place them on a rubber
mat etc.
2) When washing the aluminum wheel, use neutral
synthetic detergent and water. Avoid using cleans-
ers containing abrasives, hard brushes or an auto-
matic car washer.
WT-7