Toyota Tundra 2005 Service - Repair - Maintenance page 2248

1.6 kW Type:
2.0 kW Type:
MANUAL TRANSMISSION (RA60)
(c)
D13771
9.
Remove the 2 bolts and clutch release cylinder.
D13772
10.
(a)
(b)
(c)
11.
Using a transmission jack, support the transmission.
D14120
12.
(a)
(b)
13.
Remove the 2 bolts, nuts and stabilizer bar brackets.
D13781
− MANUAL TRANSMISSION UNIT
Remove the 3 bolts and clutch accumulator.
REMOVE CLUTCH RELEASE CYLINDER
REMOVE STARTER
Disconnect the connector.
Remove the nut and disconnect the terminal.
Remove the 2 bolts and starter.
JACK UP TRANSMISSION
REMOVE CROSSMEMBER
Remove the 4 set bolts of the engine rear mounting on the
crossmember.
Remove the 4 nuts, washers, bolts and crossmember.
REMOVE STABILIZER BAR BRACKET
MT−5