Toyota Tundra 2005 Service - Repair - Maintenance page 2284

MANUAL TRANSMISSION (RA60)
(g)
(h)
D13945
5.
(a)
(b)
(c)
D13966
(d)
D13967
− INPUT SHAFT
Using a snap ring expander, install the snap ring.
Install the spacer to the input shaft.
INSTALL 3RD GEAR
Apply gear oil to the needle roller bearing and 3rd gear ta-
per cone.
Install the synchronizer ring set No.3 to the clutch hub
No.2.
Install the needle roller bearing and 3rd gear to the input
shaft.
Install the pin and 3rd gear thrust washer to the input
shaft.
MT−41