MT−38
SST
MANUAL TRANSMISSION (RA60)
REASSEMBLY
Groove
1.
(a)
HINT:
Make sure that the bearing is installed in the direction shown in
the illustration.
D13957
(b)
D13958
(c)
D13959
−
INPUT SHAFT
INSTALL INPUT SHAFT BEARING
Using SST and a press, install the input shaft bearing to
the input shaft.
SST
09950−00020
Select a snap ring that allows for the minimum amount of
axial play.
Standard clearance: 0.1 mm (0.0039 in.) or less
Mark
A
B
C
D
E
F
Using a brass bar and hammer, tap in the snap ring.
Thickness mm (in.)
2.65 to 2.70 (0.1043 to 0.1063)
2.70 to 2.75 (0.1063 to 0.1083)
2.75 to 2.80 (0.1083 to 0.1102)
2.80 to 2.85 (0.1102 to 0.1122)
2.85 to 2.90 (0.1122 to 0.1142)
2.90 to 2.95 (0.1142 to 0.1161)
MT0HX−01