Toyota Tundra 2005 Service - Repair - Maintenance page 2233

CLUTCH −
INSTALLATION
1. INSTALL NEW GASKET
2. INSTALL MASTER CYLINDER WITH 2 MOUNTING
NUTS
Torque: 14 N·m (143 kgf·cm, 10 ft·lbf)
D04399
3. CONNECT CLUTCH LINE TO MASTER CYLINDER
Using SST, connect the clutch line.
SST
Torque: 15 N·m (155 kgf·cm, 11 ft·lbf)
4. INSTALL CLEVIS PIN, WAVE WASHER AND CLIP
5. FILL CLUTCH RESERVOIR WITH BRAKE FLUID AND
BLEED CLUTCH SYSTEM
SST
6. ADJUST CLUTCH PEDAL (See page CL−2)
7. CHECK FOR LEAKS
D06510
CLUTCH MASTER CYLINDER
09023−00101
CL−9
CL084−02