Ipv6 Router Isis - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

Version 8.3.11.1

Version 7.5.1.0

To assign a network entity title to enable IS-IS, use the net command.

ipv6 router isis

Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.

ipv6 router isis [tag]

To disable IS-IS routing, use the no router isis [tag] command.

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

— configures an IS-IS network entity title (NET) for the routing process.

— enables the IS-IS routing protocol.

(OPTIONAL) This parameter is a unique name for a routing

process. A null tag is assumed if the tag option is not

specified. The tag name must be unique for all IP router

processes for a given router.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Intermediate System to Intermediate System (IS-IS)