Ipv6 Router Isis - Dell Z9500 Command Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.5.1.0
Usage To assign a network entity title to enable IS-IS, use the net command.
Information
Related
•
Commands
•

ipv6 router isis

Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Z9500
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag
Defaults Not configured.
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Intermediate System to Intermediate System (IS-IS)
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
net — configures an IS-IS network entity title (NET) for the routing process.
router isis — enables the IS-IS routing protocol.
(OPTIONAL) This parameter is a unique name for a routing
process. A null tag is assumed if the tag option is not
specified. The tag name must be unique for all IP router
processes for a given router.
1083