Graceful-Restart T2 - Dell S4810 Reference Manual

Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.3.1.0

graceful-restart t2

Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for
each database to synchronize.
S4810
Syntax
graceful-restart t2 {level-1 | level-2} seconds
To return to the default, use the no graceful-restart t2 command.
Parameters
level-1, level-2
seconds
Defaults 30 seconds
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
982
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Enter the keywords level-1 or level-2 to identify the
database instance type to which the wait interval applies.
Enter the gracefule-restart t2 time in seconds. The
range is from 5 to 120 seconds. The default is 30 seconds.
Introduced on the S6000.
Intermediate System to Intermediate System (IS-IS)