FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
Example
The following example renews an IP address that was acquired from a DHCP
server for VLAN 19.
Console#
19
renew dhcp vlan
ip default-gateway
The ip default-gateway Global Configuration mode command defines a
default gateway (device). Use the no form of this command to restore the
default configuration.
Syntax
ip-address
ip default-gateway
no ip default-gateway
Parameters
ip-address—Specifies the default gateway IP address.
Command Mode
Global Configuration mode
Default Configuration
No default gateway is defined.
Example
The following example defines default gateway 192.168.1.1.
Console(config)#
192.168.1.1
ip default-gateway
show ip interface
Use the show ip interface EXEC mode command to display the usability
status of configured IP interfaces.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
603
IP Addressing Commands