Ingress interface:Gi 1/20
Egress interface:Gi 1/14 to 1.7.1.2[CAM hit 103710]
unfragmented packet
packet
show ip interface
View IP-related information on all interfaces.
S4810
Syntax
show ip interface [interface | brief] [configured]
Parameters
interface
brief
configured
IPv4 Routing
Gi 1/10 to 1.2.1.2[CAM hit 103710] fragmented
(OPTIONAL)
Enter the following keywords and slot/port or number
information:
•
For a Loopback interface, enter the keyword Loopback
then a number from 0 to 16383.
•
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
•
For the Management interface, enter the keyword
ManagementEthernet then zero (0).
•
For the Null interface, enter the keyword null then zero
(0).
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
•
For a stack-unit interface, enter the keyword stack-
unit then the stack unit number. The range is from 0 to
7.
•
For a tunnel interface, enter the keyword tunnel then
the tunnel interface number. The range is from 1 to
16383.
•
For a VLAN, enter the keyword vlan then a number from
1 to 4094.
(OPTIONAL) Enter the keyword brief to view a brief
summary of the interfaces and whether an IP address is
assigned.
(OPTIONAL) Enter the keyword configured to display the
physical interfaces with non-default configurations only.
897