Show Ip Interface - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

show ip interface

View IP-related information on all interfaces.

show ip interface [interface | brief] [configured]

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

IPv4 Routing

Enter the following keywords and slot/port or number

information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

For the Management interface on the stack-unit, enter

the keyword ManagementEthernet then the slot/port

information. The slot range is from 0 to 1. The port range

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a Null interface, enter the keyword null then the Null

interface number.

For a VLAN interface, enter the keyword vlan then a

number from 1 to 4094.

For a stack-unit interface, enter the keyword stack-

unit then the stack unit number.

For a tunnel interface, enter the keyword tunnel then

the tunnel interface number. The range is from 1 to

(OPTIONAL) Enter the keyword brief to view a brief

summary of the interfaces and whether an IP address is

(OPTIONAL) Enter the keyword configured to display the

physical interfaces with non-default configurations only.

EXEC Privilege