Clear Dampening - Dell S6000 Reference Manual

Related
mac learning-limit
Commands
configured or disallow station move on learned MACs.
show interfaces

clear dampening

Clear the dampening counters on all the interfaces or just the specified interface.
S6000
Syntax
clear dampening [interface]
Parameters
interface
Defaults Without an interface specified, the command clears all interface dampening
counters.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Interfaces
— allows aging of MACs even though a learning-limit is
— displays information on the interfaces.
(OPTIONAL) Enter any of the following keywords and slot/
port or number to clear counters from a specified interface:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
631