Clear Chassis Display Message - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

clear chassis display message

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear chassis display clear chassis display
message message
202
clear chassis display message
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Clear or stop a text message on the craft interface display, which is on the front of the
router or on the LCD panel display on the switch. The craft interface alternates the display
of text messages with standard craft interface messages, switching between messages
every 2 seconds. By default, on both the router and the switch, the text message is
displayed for 5 minutes. The craft interface display has four 20-character lines. The LCD
panel display has two 16-character lines, and text messages appear only on the second
line.
—Clear or stop a text message on the craft interface display.
none
clear
Configuring the LCD Panel Display on J-EX Series Switches (CLI Procedure) on page 166
set chassis display message on page 233
show chassis craft-interface
clear chassis display message on page 202
See show chassis craft-interface for an explanation of output fields.
The following example displays and then clears the text message on the craft interface
display:
user@host> show chassis craft-interface
Red alarm: LED off, relay off
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3 4
-------------------------------
Green .. *.. * *.
Red ........
LCD screen:
+--------------------+
|NOC contact Dusty
|(888) 526-1234
+--------------------+
user@host> clear chassis display message
user@host> show chassis craft-interface
Red alarm: LED off, relay off
Yellow alarm: LED off, relay off
Host OK LED: On
Host fail LED: Off
FPCs 0 1 2 3 4
5 6 7
|
|
5 6 7