Clear Dampening - Dell S4810 Reference Manual

clear dampening

Clear the dampening counters on all the interfaces or just the specified interface.
S4810
Syntax
clear dampening [interface]
Parameters
interface
Defaults Without an interface specified, the command clears all interface dampening
counters.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
Usage
After you enter the clear counters command and verify the results with the
Information
show interfaces command, the line rate is not reset to 0.00%.
Example
Dell#clear dampening tegigabitethernet 1/2
Clear dampening counters on TeGi 1/2 [confirm] y
Dell#
Interfaces
(OPTIONAL) Enter any of the following keywords and slot/
port or number to clear counters from a specified interface:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
741