Neighbor Distribute-List - Dell Force10 S4810P Reference Manual

To delete a description, use the no neighbor {ip-address | peer-group-name}
description command.
Parameters
ip-address
peer-group-name
text
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0

neighbor distribute-list

Distribute BGP information via an established prefix list.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} distribute-list prefix-
list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ip-address | peer-
group-name} distribute-list prefix-list-name {in | out} command.
Parameters
ip-address
peer-group-name
prefix-list-name
in
out
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group.
Enter a continuous text string up to 80 characters.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group to apply the distribute list filter to all
routers in the peer group.
Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to allow all
routes).
Enter the keyword in to distribute only inbound traffic.
Enter the keyword out to distribute only outbound traffic.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
385