Configuration Display; Basic Configurations; Basic System Configurations - 3Com 4510G Configuration Manual

9

Basic System Configurations

While performing basic configurations of the system, go to these sections for information you are
interested in:

Configuration Display

Basic Configurations

CLI Features
Configuration Display
To avoid duplicate configuration, you can use the display commands to view the current configuration
of the device before configuring the device. The configurations of a device fall into the following
categories:
Factory defaults: When devices are shipped, they are installed with some basic configurations,
which are called factory defaults. These default configurations ensure that a device can start up
and run normally when it has no configuration file or the configuration file is damaged.
Current configuration: The currently running configuration on the device.
Saved configuration: Configurations saved in the startup configuration file.
Follow these steps to display device configurations:
To do...
Display the factory defaults of
the device
Display the current validated
configurations of the device
Display the configuration saved
on the storage media of the
device
For details of the display saved-configuration command, refer to File System Management
Commands in the System Volume.
Basic Configurations
This section covers the following topics:
Entering/Exiting System View
Use the command...
display default-configuration
display current-configuration
[ [ configuration [ configuration ] | interface
[ interface-type ] [ interface-number ] ]
[ by-linenum ] [ | { begin | exclude | include }
regular-expression ] ]
display saved-configuration [ by-linenum ]
9-1
Remarks
Available in
any view.