User Privilege Level - 3Com S7906E Command Reference Manual

Description
Use the user-interface command to enter one or more user interface views to perform configuration.
Examples
# Enter VTY 0 user interface view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0]

user privilege level

Syntax
user privilege level level
undo user privilege level
View
User interface view
Default Level
3: Manage level
Parameters
level: Command level ranging from 0 to 3.
Description
Use the user privilege level command to configure the command level available to the users logging
into the user interface.
Use the undo user privilege level command to revert to the default command level.
By default, the commands of level 3 are available to the users logging into the AUX user interface. The
commands of level 0 are available to the users logging into VTY user interfaces.
Examples
# Configure that commands of level 0 are available to the users logging into VTY 0.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface vty 0
[Sysname-ui-vty0] user privilege level 0
# You can verify the above configuration by Telnetting to VTY 0 and displaying the available commands,
as listed in the following.
<Sysname> ?
User view commands:
display Display current system information
ping
quit
Ping function
Exit from current command view
1-27