Display Transceiver Manuinfo - 3Com S7906E Command Reference Manual

Field
Wavelength(nm)
Transfer distance(xx)
Digital Diagnostic Monitoring
Vendor Name
Ordering Name

display transceiver manuinfo

Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
View
Any view
Default Level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays part of the electrical label information of the H3C
customized anti-spoofing pluggable transceiver plugged in the specified interface. interface-type
interface-number represents interface type and interface number. If it is not specified, the command
displays part of the electrical label information of the H3C customized anti-spoofing pluggable
transceiver(s) in all the interfaces.
Description
Use the display transceiver manuinfo command to display part of the electrical label information of a
single or all H3C customized anti-spoofing pluggable transceivers.
Optical transceiver: central wavelength of the laser sent, in
nm. If the transceiver supports multiple wavelengths, every
two wavelength values are separated by a comma.
Electrical transceiver: displayed as N/A.
Transfer distance, with xx representing km for single-mode
transceivers and m for other transceivers. If the transceiver
supports multiple transfer medium, every two values of the
transfer distance are separated by a comma. The
corresponding transfer medium is included in the bracket
following the transfer distance value. The following are the
transfer media:
9 um: 9/125 um single-mode fiber
50 um: 50/125 um multi-mode fiber
62.5 um: 62.5/125 um multi-mode fiber
TP: Twisted pair
CX4: CX4 cable
Whether the digital diagnosis function is supported, where:
YES: supported
NO: not supported
Vendor name or name of the vendor who customizes the
transceiver:
H3C customized
displayed.
Other transceivers: The vendor name is displayed.
Pluggable transceiver model
1-19
Description
anti-spoofing transceiver: H3C is