Display Power - 3Com S7906E Command Reference Manual

Description
Use the display memory command to display the usage of the memory of all or specified boards of a
device.
Examples
# Display the usage of the memory of a device.
<Sysname> display memory
System Total Memory(bytes): 395165344
Total Used Memory(bytes): 80815056
Used Rate: 20%
Table 1-3 display memory command output description
System Total Memory(bytes)
Total Used Memory(bytes)
Used Rate

display power

Syntax
display power [ power-id ]
View
Any view
Default Level
1: Monitor level
Parameters
power-id: Displays the status of the specified power supply unit, where power-id represents the power
supply unit number. The value varies with devices.
Description
Use the display power to display the status of the power supply of a device.
Examples
# Display the status of the power supply of a device (The displayed information varies with devices).
<Sysname> display power
Power 1 State: Absent
Power 2 State: Normal
The above information indicates that power supply 2 works normally, and power supply 1 and power
supply 3 are absent.
Field Description
Total size of the system memory (in bytes)
Size of the memory used (in bytes)
Percentage of the memory used to the total memory
1-11